This project is taking a while to get done and I wanted to see something happen so I bolted down the frog, pushed the sides on, used a quick grip to clamp the infill to the frog and stuck in the iron. And pushed it over some [super easy to plane] wood. And got some thou and half shavings. I think I see potential.
- Well, I didn't expect that to work, but nothing took flight. Fly cutting steel on a mag chuck as weld prep. The chuck is so new it doesn't have a model number. Or serial number for that matter.Tee slot chamfer tool, both edges in go.Clearance is clearance Clarence. Space is kinda tight in there, lots of clamp hopscotch. Slot clean up. Using flexly flyer garage sale end mill, at least it's carbide. Cuts something like 0.012" under, maybe a regrind?