Yeah, this might just work. Cut the leg tenons, did a test assembly to take it out for a test drive and also to see where I want to put the legs. Placement is a bit constrained on the right side – knots and the leg overlaps the vise hardware a little.
- Spoke spear - for digging nipples out of a puddle of linseed oil and putting them in a deep(ish) dish rim socket. Serrations really help retain the nipple. No idea of the angle, just stuck a shim under the front of the spinner and ground away.I guess Abom torque isn't always the answer. Interesting - no springs, a belleville washer stack instead.Well, I didn't expect that to work, but nothing took flight. Fly cutting steel on a mag chuck as weld prep. The chuck is so new it doesn't have a model number. Or serial number for that matter.